LEVEL ACCESS
The Warwick, Worcester & Winchester are our most popular and versatile range of shower trays and enclosures, boasting a number of beneficial features. Ergonomically designed, to be cut to length and width the trays are suitable for a number of adaptations and cover an array of sizing requirements.
The capacity for the trays to be trimmed also helps in the compensation for ‘out of square’ walls. This collection of trays also features an integral pipe duct for optional concealment of pipe work and a tiling lip to prevent movement and leakage of water. Easy to install, there is not normally any need to cut joists when fitting the trays level access, and all three can be surface mounted if required.
Ideal for both walk-in and wheelchair users alike the Warwick, Worcester & Winchester provide the perfect showering solution.
These trays are not handed.
TECHNICAL INFORMATION
Level access or surface mounted with an optional low ramp
These trays are designed to be cut down in width and length
Tray height (all) 35mm
Not handed
Configuration of bespoke and standard doors, panels and enclosures available
Reinforced throughout to ensure tray will be level, regardless of where the tray is cut
Concealed pipe work duct for optional concealment of pipe work
All the trays can be trimmed for out of square walls
For level access, joists are not normally cut or weakened in any way
Colour option available
Compensator for out of square walls
Tiling lip to prevent movement and water leakage
The Winchester is suitable for 2 & 3 wall installations
The Warwick & Worcester are designed for 3 wall installations (they can be used for 2 wall installations - please contact our technical department for further details)
Single half height fixed panel & support post with half height bi-parting doors. Curtain rail & single white curtain. Specify tile to tile measurement.
| Level Access | Surface Mounted | Easy Access
